Our focus

is to create innovative formulations and products that are lighter and stronger, while at the same time reducing material and labor costs. Our company is very adamant about recycling and reducing VOC emissions. The composites industry can no longer ignore economic and environmental issues and must find new solutions to insure a fruitful future. It is our mission to support the composites industry while keeping the environment and cost in mind. Allow us to help you overcome tough production needs or improve your existing operations.

Recycling Systems

Recycling and Dry Additive System with No Roll™

• FRP Grinder
• Dry Additive Dispensing
• No Roll™

The recycling and dry additive system with No Roll™ is a two part system incorporating a formulation designed to compliment one another or can be utilized separately.

FRP Grinder This machine is not a mulcher, but similar to hammer-mill. It is built to withstand abrasive fiberglass trimmings and maintains a low temperature; eliminating fear of combustion. The FRP grinder will allow you to maintain the integrity of the fibers for viable reuse. Our grinders are available in four basic models with various screen sizes. Click Here to view the FRP Grinder in action! Click Here for Grinder commonly asked questions. Click Here for Grinder models and details .

Dry Additive Dispensing This system consist of a metering device and a hopper designed to attach to an air powered fiberglass spray gun/chopper. This process enables you to use recycled FRP fibers with preexisting spray-up machinery allowing you to spray a stream. Click Here to view a spray-up demo with our dispensing system. Click Here to download full version of demo. (14 MB)

No Roll™
Seven years in the making this spray-up formulation virtually eliminates all rollout labor even when using 1” long chop. No Roll™ uses an internal, high-solid spray laminate mix of up to 25% glass fiber that requires no rollout. Due to its unique design it allows for:

VOC levels as low as 10 ppm Faster mold turnover, 3 to 6 minute gel time Improved physical product strength Reduced water absorption Can be applied between 0.040” to 0.500”

Formulations

No Roll™ Formulation
Seven years in the making this spray-up formulation virtually eliminates all rollout labor even when using 1” long chop. No Roll™ uses an internal, high-solid spray laminate mix of up to 25% glass fiber that requires no rollout. Due to its unique design it allows for:

• VOC levels as low as 10 ppm
• Faster mold turnover, 3 to 6 minute gel time
• Improved physical product strength
• Reduced water absorption
• Can be applied between 0.040” to 0.500”

Click Here to view a spray-up demonstration with No Roll™.
Click Here to download full version of demo. (14MB)

Custom Formulations

For a custom formulation please contact Wolfgang Unger at 1(866) 716-4820 or email us Click Here.

Additives

Dramatic shifts in resin value, increasing competition, declining industry consolidations and large company expansions are spurring the need for product innovation. Without a doubt, the need to adapt and capitalize upon today's industry changes is key to maintaining success. Doing more with less formula is good for business! Combine the lightness of a polymer with the stiffness and strength of high performance fibers.

Additives found in our standard No Roll™ formulation allow for improved applicability, strength , lower tooling costs , as well as reduction of weight and density. For more information on No Roll™ Click Here.

Benefits of Natural Additives

Benefits of organic additives in the reinforced plastic composites marketplace are numerous, and include:

• Improved impact strength
• VOCs suppression
• Weight reduction
• Reduce formulation costs

Such additives are well suited for a variety of FRP processes and applications: spray-up, filament winding, RTM, tooling, hand lay-up, casting, press molding.

Natural additives are readily available performance enhancers that can significantly reduce production costs while improving quality. Most additives will interact chemically with the matrix resin and usually are very compatible with unsaturated polyesters.

Traits of a superior formulation incorporating natural fillers include strong chemical bonding, a lower specific gravity than glass and an affinity for styrene.

For more information on incorporating natural additives in your production regiments or for a quote on a custom or No Roll™ formulation please contact us at 1(866) 716-4820 or to email us Click Here.

Kenaf

Food for thought... another potential additive for associated endeavors. Please email us for further information.

Consulting

FRP Equipment, Inc. and Seawolf Design, Inc. offers a full range of consultation services for the Composite/FRP Industry.

• Recycling solutions
• Custom formulations
• Reduce labor and material costs
• In-house and/or on-site consultation and detailed instruction
• In-house and/or on-site training

Mr. Wolfgang Unger, head CEO, has over 40 years of manufacturing and research experience in the Composites/FRP industry. He has the knowledge that can free your operation from inefficiency and give you the competitive edge needed in this industry. Call 1(866)716-4820 for additional information.

Our location:

View Larger Map